The Surface Mount was born out of necessity.Often there are areas on a vessel which make it impossible to install a thruhull fitting, such as frames, fuel tanks etc. The Surface Mount attaches to the outer surface of the hull andthe power cable enters the hull above the waterline.
All lights now utilize Tritonium Optical lenses, and are supplied with a quick connect system by Deutsch, ensuring almost 'fool proof' installation and compliance with ABYC, E11 regulations.
Approved by Lloyds register and undergoing UL,RINA, DNV and ABS approvals.

Please note the picture is for reference only.  The cost is per unit.

LUX Output Similar to:                        35W Xenon
Size (diameter)                                   137 mm/5 3/8??

Size (profile)                                         32mm/ 1 11/32??

Total Length of Stem w/ connectors      146 mm/5 3/4??

Extension cable length                          5m/16 1/2'
Hole cut-out for cable entry                  22 mm/7/8??

Lens angles                                         50 degreesfull beam
Material                                              Aluminum BronzeAB2
Lens                                                   TritoniumOptical Lens
LED life                                              40,000 + hours
LUX level @ 1 meter                          5000
Ideal installation depth                          150 mm - 200mm/6"- 8"
Recommended spacing                         0.5m ?? 1.2m/2' - 4'

Driver Specifications:

Size Length                                         92 mm/35/8??
       Width                                          52mm/2 3/64??
       Height                                         28 mm/11/8??
Current    12VDC                               1.7 Amps
               24VDC                               800 mA
                110 VAC50/60 hz               170mA
                240 VAC50/60 hz               85 mA